-50%
QuickSolution Welding Flux-Cored Rods
$13.97 – $19.97
The simplest way to weld alumnium parts!
No extra tools, and expensive equipment required! These Welding Flux-Cored Rods make a sound joint, stronger than the parent mental!
Easily connect thin and thick parts together! Our rods is in low temperature melting point and no flux is required! Extra corrosion resistance and without deformation to the base metal.
Features:
- Smooth Welding Effect
These rods have a smooth and quick welding effect because of its premium internal powder.
- Conveniently Repair
Great weldability with high thermal, electric conductivity and excellent processing performance.
- No Flux or Fumes
No flux or fumes are needed because welding core and coating act as the salt base.
- Low Melting Point
With low melting point(647℃~658℃), rods minimise parent material distortion during welding.
- Premium Quality Rods
Mainly weld aluminium and aluminium alloy, also can braze any non-ferrous materials eg. pot metal or galvanised steel
- Widely Applicable
Can apply on truck beds, loading ramps, docks, diamond plate, irrigation piping, engine blocks, transmission housing etc.
- Works in Most Aluminium
Recommended for aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0
Instructions:
- Clean the welded area to shiny by stainless steel brush
- Evenly heat the welded area
- Rub the rod vigorously against the heated area until the rod starts melting
Specifications:
- Material: Aluminum-Magnesium
- Melting temperature: Above 896°F (480°C)
- Package Size: 50.0 cm * 40.0 cm * 40.0 cm
- Diameter per rod: 1.6mm
Package Includes:
- Set of 10pcs x QuickSolution Welding Flux-Cored Rods
- Set of 30 pcs x QuickSolution Welding Flux-Cored Rods
Bonnie Christensen –
I took advantage of the rod offer to examine. The rods performed as advertised as long as the included instructions are followed. These rods are non-flux coated so your surface needs to be free of impurities. and heat control is important. I tried them on aluminum refrigerant lines and they worked great. I am going to buy more when my supply gets low.
Mirai R –
As a newbie to any kind of welding, these rods are easy to use and a fun way to experiment and learn. I plan on continuing using these until I figure out how to weld, if not just on the novice level.
LaQuina Brown –
Tried it and not bad if you know how to weld then you know how to use this. It takes time to heat up your metal be for applying this to it but you have to be patient. Tried it and this is what it looks like easy to use and worth the money. I’m a welder it’s my full time job and well decided to give this a shot. Very small projects and this was my result.
Steven Rittenhouse –
Follow the directions and you shouldn’t have a problem. Th a most important thing to remember is prep, make sure the surface is clean.
Donald Beckinsale –
Took a couple of tries to understand how to use the rods. But when I did, they worked great. The aluminum will deform before the welds will. Very impressed at how strong this stuff is.